Place
the cursor over thumbnail to view enlarged image
Features at a glance
Versatile tool for atherosclerosis
diagnosis and prognosis
Works with Windows* 98SE/ME/XP Operating
System
Serial port / optional USB port interface
Normalized PPG waveforms for all limbs
Automatic and precise calculation of
ABI and ASI
Automatic blood pressure measurement
With all necessary accessories
Easy - to - operate software
Description
AtheroWin
is the-state-of-the-art PC Windows* based ankle
Brachial Index (ABI) and Arterial Stiffness Index
(ASI) measuring System with interpretation.
The
system uses automatic limb NiBP (Non-Invasive Blood
Pressure) measurement to calculate Right and Left
ABI values. It also incorporates PPG (Photoplethysmogram)
for Blood-volume waveforms of all four limbs; viz.
Right & Left Index finger, Right & Left toes.
Both BP and PPG are recorded sequentially using the
protocol similar to conventional ABI.
The
system also calculates Stiffness Index and Carotid
Femoral Pulse Wave velocity. These are established
early markers to analyze the arterial stiffness that
plays a very important role in prediction of Atherosclerosis.
Windows*
based AtheroWin
software & serial port communication with the
AtheroWin instrument
turns any PC into a full-fledged ABI & ASI system,
with online real time graphs on screen. It gives a
multicolor / B&W one-page report on A4 size paper.
Inbuilt patient database with more than 1000 patients
memory helps you keep track of patient history. All
at your mouse clicks in a very user-friendly AtheroWin software environment
Technical Specifications$
Results
Instrument
Specifications :
Blood
Pressure
Method
: Oscillometric
Pressure
Detection : Semiconductor
sensor
Pressure
Display Range : 0 - 240 mm Hg
Heart
Rate Range : 30 - 240 bpm
Continuous
PPG Waveform
Sensing
Method Direct contact,
Photoelectric
sensor
Test
Method
Fully
automatic Recordings on all
limbs
simultaneously.
Database
MS
Access Easy recall of any previous
test
Data
Acquisition
Channels
: Blood Pressure, PPG
Sampling
rate : 200 Samples / sec
Resolution
: 12 bit
Data
Storage : Raw data on HDD.
Interface
: RS232C Serial /Optional USB
PC
Specifications :
OS
:
Windows*95/98SE
CPU
:
Intel*
Celeron* 455mHz/P4* or
better
HDD
:
4.3 GB min.
RAM
:
32 MB min.
Printer
:
Any Windows* compatible
Inkjet/LaserJet
Printer.
STANDARD
ACCESSORIES
PPG
Cable with Sensor - 1No.
BP Cuff
with hose - 1 Nos.
Serial
Cable-1No.
Hardware
unit-1No.
Software
CD-1No.
POWER
REQUIREMENTS
Voltage
230 VAC ± 10%
Frequency
50 Hz
Power
Consumption 1.0 A maximum
PHYSICAL
CHARACTERISTICS
Instrument
Dimensions : 405 mm x 335 mm
x 95mm
Approximate
Instrument Weight 5.60 Kg
ENVIRONMENTAL
REQUIREMENTS
Operating
and Storage Temperatures
15 oC to 45 oC
Ambient
Relative Humidity 15% to 90%,
non-condensing
Pressure/Altitude
Operating
and Storage 523 mm Hg and 760
mm Hg
$
Specifications are subject to
change without notice.
*All
regd. trademarks are acknowledged
to their respective owners.
